Home / Shop / EV Chargers / Commercial EV Chargers / HCS-40 EV Charger with COSMOS and ChargeGuard

Firefly Juice – Get Juiced™

HCS-40 EV Charger with COSMOS and ChargeGuard

$1,275.00

The HCS-40 EV Charger with COSMOS and ChargeGuard is an Enphase commercial charging option rated up to 7.7 kW and 32 A with a J1772 connector. Firefly Juice can help confirm service capacity, site layout, duty cycle, and installation scope before purchase.

SKU: HCS-40R-C17-L25-A157-170 Categories: , Tag: Brand:

Description

Verified specifications, included hardware, official documents, and installation considerations for the HCS-40 EV Charger with COSMOS and ChargeGuard are summarized below. The best fit depends on the vehicle connector, the vehicle's onboard charging limit, and the available electrical service.

Buy the charger or request installation guidance

Hardware checkout is separate from installation service. Buyers who need circuit, panel, load-management, mounting, or permitting guidance can request an installation review from Firefly Juice.

Why Firefly Juice recommends it

This model is best treated as a commercial or shared-site option. Firefly Juice recommends confirming duty cycle, service capacity, mounting, access control, network requirements, and fulfillment support before it is offered for sale.

Buyer-friendly benefits

  • Rugged, fully sealed NEMA 4 enclosure for indoor or outdoor installation
  • Impact- and crush-resistant J1772 connector with Type 4X watertight and corrosion-resistant, overmolded rubber EV connector
  • 25 ft of charging cable for flexible installation and reach
  • Integrated cable wrap and included Connector Holster keep charging cord neatly stowed
  • Minimal standby power means no on/off switch required, saving power
  • In the event of a minor power fault, automatic circuit reclosure timer will re-check conditions to begin charging again as soon as possible, if needed
  • Backed by a 5-year limited warranty and outstanding customer service
  • ChargeGuard – Control who can use your charger with key access control. Drivers can insert and turn the key to start charging and take it with them. The vehicle will continue to charge until it’s disconnected. Leave the key in the station for open-access charging.
  • Perfect solution for simple integration to building management or other load control systems
  • Four levels of power control (100%, 50%, 25%, and 0%)
  • Two optically-coupled Open Collector outputs
  • Perfect solution for developers or advanced integration with building energy management and other load control systems
  • 3.3 V – 5 V CMOS-compatible UART
  • Protocol document available upon request
  • Available serial commands include:Five levels of power control (100%, 75%, 50%, 25%, and 0%)View vehicle connected status – Monitor if a vehicle is currently connected to the station or if the station is available for useView EVSE active status – Monitor if the station is making power available for chargingView advanced EVSE diagnostic information to determine fault status remotelyControl up to two user-supplied external LED lights (sources 8 mA each)
  • Five levels of power control (100%, 75%, 50%, 25%, and 0%)
  • View vehicle connected status – Monitor if a vehicle is currently connected to the station or if the station is available for use
  • View EVSE active status – Monitor if the station is making power available for charging
  • View advanced EVSE diagnostic information to determine fault status remotely
  • Control up to two user-supplied external LED lights (sources 8 mA each)

Technical specifications

  • Charging power: 32 A (7.7 kW) max.
  • Product dimensions: 19.7" L x 8.9" W x 5.3" D
  • Product weight: 13.5 lb
  • Installation: Hardwired (3 ft service whip provided)
  • Supply circuit: 208/240 V, 40 A
  • Charge cable length: 25 ft
  • Vehicle connector type: Ruggedized J1772 connector
  • Accessories included: J1772 Connector Holster (wall mount), set of two keys
  • Enclosure: Fully sealed NEMA 4
  • Environment rating: Indoor/outdoor rated
  • Operating temperature: -22°F to +122°F (-30°C to +50°C)
  • Certifications: ETL, cETLus, ENERGY STAR®

Vehicle and installation context

Charging speed is limited by the vehicle's onboard acceptance rate, connector, supply voltage, circuit capacity, and site conditions. Product selection does not replace an electrical assessment. Final compatibility, permitted installation method, conductor sizing, load management, and code requirements must be verified before installation.

What is included

  • HCS-40 with ChargeGuard and COSMOS
  • Set of two keys
  • User manuals
  • Connector Holster

Official Enphase documents

Frequently asked questions

Which vehicles can use this charger?

The source connector is J1772. Confirm the vehicle inlet or approved adapter and the vehicle's onboard charging limit before purchase.

What electrical setup does it require?

The source lists Hardwired and 208/240 V. A licensed electrician should verify the circuit, conductor sizing, breaker, load calculation, mounting location, and permit requirements.

Will the vehicle charge at the full advertised rate?

Not necessarily. The charger is rated up to 7.7 kW, but actual speed is limited by the vehicle, circuit, voltage, temperature, and charging conditions.

Can Firefly Juice install it?

Yes. Firefly Juice provides residential and commercial EV charger installation, including electrical planning and code-compliant installation for homes and businesses. To request an installed quote and confirm service availability, visit our EV charger installation page.

Additional information

Weight13.5 lbs
Dimensions19.7 × 8.9 × 5.3 in
Customer type

Commercial

Connector

J1772

Installation method

Hardwired

Maximum output current

32 A

Maximum charging power

7.7 kW

Connectivity

Unconnected

Product family

HCS

Number of charging ports

Single

Enphase ecosystem integration

Feature-qualified

Environment

Fully sealed NEMA 4; Indoor/outdoor rated

Supply voltage

208/240 V

©Copyright FireFly Construction Group Inc.
Privacy Policy | Terms and Conditions